RANS S-6S
This is the construction log (page 5) for my RANS
S-6S Taildragger.
|
Painting jig + VIDEO |
First coat of primer sprayed! |
Primer on the ailerons. |
Priming and sanding flight controls. |
|
First coat of white paint on flaps. |
Still painting... |
Prime/Paint small pieces. |
Control attachments. |
|
Painting a bunch of small parts. |
Moved fuse into booth. Working on little exit pieces. |
Masking off the interior. |
First coat of primer sprayed on fuselage. |
|
Primer bottom fuse and cut and trimmed fiberglass. |
Sprayed final coat of primer. |
Sprayed one more coat of primer and replaced booth floor. |
White paint! |
|
Sprayed primer after sandblasting fuselage. |
Primed control horns. |
Re-installed the bottom stringers. |
Mounted a new trim cable. |
|
Priming the left wing. |
First coat of white on L wing. |
Final coat of white. |
Cut and fit the gap seals. |
|
<< Previous | Home | Next >> |
|||