RANS Aircraft Tool List

This is a tool list as supplied from RANS for the S-6S Coyote. Although this list is for the
S-6, most of these tools will be needed to construct any of the RANS airplane kits.

Hand Tools

Pliers
Needle Nose Pliers
Side Cutters
Aviation Snips
Hammer
Rubber Mallet
Center Punch
Drift Pin and Punch Set
Several Small Clamps
Wrench Set
Ruler
Fly Cutter
1/2" Uni-Bit Step Drill
Hack Saw
Dimpling Tool - 1/8" Die

   Safety Wire Pliers
Electrical Wire Strippers
Pop Rivet Tool
Click Punch
Ball Peen Hammer
Scratch Awl
Screwdriver Set
Safety Glasses
Socket Set
2 or 4 Foot Level
Electronic Protractor
Utility Knife
Hole Saw
Files
1/8" Countersink

Power Tools

Electril Drill
Dremel
Soldering Gun
Electric Grinder

   Bench Disk Sander
Heat Gun
Household Iron (for fabric planes)
90 Degree Drill Adaptor

Lubricants, Sealants, and Glues

Lithium Grease
Contact Cement
Super Glue
3M DP-460

   Clear Silicone
WD-40
Wheel Bearing Grease
3M DP-460 Mixer Tips

Drill Bit Sizes

#40
#30
#28
#21 & 10-32 Tap
#19
#11
5mm x .8mm Tap

   1/4"
5/16"
3/8"
1/2"
7/8"