So I bought this three-wire connector so now I can disconnect the sensor.
|
|
The fuel flow sensor gets
wired to a harness coming from the fuel flow gauge. Since the wires go
through the firewall, I wanted to be able to disconnect the sensor
instead of just connecting the wires and heat shrinking them. So I bought this three-wire connector so now I can disconnect the sensor. |
|
|
Here is the fuel flow sensor installed. The wires are secured to the fuel line fire sleeve with zip ties. |
|
|
I added this solenoid because the switch supplied by RANS is only rated to 15 amps so I didn't want all the power going through the switch. It is wired according to the diagram below... |
|
|
|