TIP: When you screw these brackets to the floor, temp install a bolt so the holes are on the same axis and a bolt can easily pass through the holes. This will make it easy to install the bolt later.
| I've done a couple odds-n-ends today. See pics below... | |
|
|
Two of the rudder pedals are installed. I've decided that I am going to order the dual brake option so I'll wait until I get the other brake cylinders before I hook it all up. |
|
|
These are the brackets that the brake
cylinders attach to.
TIP: When you screw these brackets to the floor, temp install a bolt so the holes are on the same axis and a bolt can easily pass through the holes. This will make it easy to install the bolt later. |
|
|
Check this out! It's the top of the firewall. |
|
|
This was a really fun part to build-it's the controls! Now that the gear legs are drilled out, I'm amazed at how fast everything goes together. Looking back, I could have done all this stuff months ago but I thought I needed to get the legs drilled first because everything else would be in the way. I'm getting lots done now, but all this could have been done a long time ago. |