|
It's been a while since I've worked on the plane. I've been a little burnt
out but also very busy with work. |
 |
I routed and connected the
ignition wire. I used a shielded cable with three wires for this. One
wire goes to the L ignition, one to the R ignition, and the other
connects both switches to ground. |
 |
Next I finished building
the wiring harness for the EFIS. The white wire here is the shielded
wire going out to the wingtip to the AHRS. |
 |
Here are the push-to-talk
switches. There is one on each control stick. Right now it's not
connected to anything though because I completely ripped out all the
wiring for the radio. I'm going to start over because I just wasn't
happy with the way it was going. |