|
Started covering the bottom of the left wing. |
 |
Obviously the wing is upside down here. |
 |
The key is to iron as you go-just like
when I covered the top of the wing. If you do this, you will get a
perfect, wrinkle free finish. |
 |
Even the area around the plastic bump
on the leading edge went on really well. Just takes a little finesse
with a hobby iron. |
 |
Here is the bottom covered and shrunk. |
 |
Double sided tape holds a clear plastic
strip on each rib. The fabric is riveted to the wing and the plastic
keep the rivets from tearing through the fabric. |
 |
Here are all the rivets installed.
Before I flip the wing over and rivet the top of the ribs, I will
install all the access rings on the bottom. |
|
|
|