| I'm taking a break from cutting and
fitting the interior pieces. I spent time today just doing
odds-n-ends... |
 |
In the photo to the
left, I have installed the bushing between the two gussets. This bushing
and hole are used to connect the lower horizontal stab cable. |
 |
|
I also installed the elevator push-pull tube. The hole
(in the second pic) has to be drilled out and this is lined up with a
very simple 'jig' as explained in the manual. Basically, put a bolt
through the hole and then put the fork on another block. This keeps the
holes on one end perpendicular to the holes on the other end. |
 |
These plastic pieces act as bushings for the rudder cable
to pass through. |
 |
Yours truly hard at work... |