| Covered the left side of the fuselage. |
 |
Since it was determined that the comm
antenna will work great in the tail, I secured it with JB Weld just so
it will never come off. Once the left side is covered, there is no way I
will ever be able to get to the antenna. |
 |
I started at the wing strut attach
fitting and worked my way down the bottom, up the tail, around the tail,
up the middle of the fuselage, and then around the door opening. |
 |
The seam is nice and straight. The seam
on my S-10 was crooked and it always bugged me. |
 |
Here it is all done! I am going to wait
until tomorrow to shrink it because I want to make sure the glue is 100%
dry. It took 8 hours to cover this side. |