| I secured the elevator trim cable and finished all the
taping on the right side of the fuselage. |
 |
Here you can see the two black cables.
One is the comm antenna cable and the other is the elevator trim cable.
The trim cable right now is routed up into the tail but that's just to
hold it there until it's covered. |
 |
Here the fuselage is turned upside down
but you can see the two clamps securing the antenna wire and the trim
cable. |
 |
Just a shot of the clamps. These clamps
are from the F-16 so my S-6 will be a lot faster! |
 |
Here's the antenna mounted in the tail.
The other cable is the trim cable. |
 |
Here is the right side and bottom 100%
done! Tomorrow I should be able to get the left side covered. |