 |
This is the bellcrank that
will be used to turn on and off the GPS. Panel pic
here. |
 |
The lower rod goes through
a small hole drilled into the panel dock. It aligns with the ON/OFF
switch perfectly so the rod pokes the switch and turns the GPS on or off
without having to remove the GPS from the panel. |
 |
Here you can see the rod
sticking through the panel dock case. This rod was trimmed to fit about
1/16" from the switch. |
 |
Here's a top view. You can
see the rod that goes into the panel dock. The white nylon ball link on
the top will have a rod coming off of it to a custom made button on the
front of the panel. |