|
Installed the fuel line, fit and drilled the closeout rib, scuffed up
the spar where the aluminum will get bonded, and started riveting the
top wrap! |
 |
Fitting the close out rib. |
 |
This little piece of fuel tubing will
end up as the fuel gauge. |
 |
Since I am using black fuel hose
instead of the blue fuel line that comes with the kit, I used these
metal hose clamps. |
 |
This is where I scuffed up the spar
with a Dremel. This is done to give the glue something to 'bite' when the aluminum is bonded to the spars. |
 |
I have started riveting the top leading
edge wrap to the ribs. |