|
Electric trim control panel |
 |
Here is a photo of the
cutouts for the electric trim switch and L.E.D. indicator. |
 |
This is the custom panel
that Steve made on a CNC machine. As you can see, it covers the factory
drilled holes and slot. |
 |
First I clecoed it to the
panel through the holes for the L.E.D. indicator. |
 |
Cutting the square holes is
next. I did this by drilling a bunch of holes from the backside. Then I
used an razor blade to slice through the holes. To clean it all up, I
used a 1" wide file. |
 |
Switch and indicator
mounted... |
 |
..and the labels are
installed. |
 |
Here's what it looks like
installed in the plane. |