|
I primed a bunch of the small pieces and they are ready for paint... |
 |
This is the small instrument panel. It
already has one coat of white paint so this will be the final coat. |
 |
Here are the door frames and the two
pieces that complete the top of the door. They too have been primed and
are ready for their first coat of paint. |
 |
The door frames are mounted by these L
brackets. You can't see from this picture, but there is a 6" piece of
threaded rod going straight up from the L bracket into each frame. The
door frame simply slips down over the threaded rod. |
 |
These two pieces are the root rib
close-outs. |
 |
One thing I have learned is that there
is a lot less chance of getting grit in the paint if the paint gun is
held level while spraying. So I am trying to keep all my parts vertical. |
 |
I am able to keep this part mostly
vertical by adding a small screw under the hinge. This just keeps the
hinge from fully closing. |